10Gb point to point radios city-wide in a week

Sunset and Tall mast with cellular antenna

Worlds first 10 Gigabit Point to Point Radios can be deployed to provide an entire city wide internet network within 7 days using our new Dynamic Routing.

This technology is available now and can seamlessly be used as a lower cost, faster deployed alternative to fibre.

Steve Ponton

Steve helps Engineers and Scientists to identify solutions for the design of RF and Microwave Systems and Optical Systems by listening to their challenges and calling upon his extensive knowledge of suppliers and specifications to deliver technical and commercial objectives.

Further reading

Here are some other, related articles that you may find useful.

Read more

Understanding the Principle of a Spectrum Analyzer: A Deep Dive into Interference and Cable Analysis

Introduction to Spectrum AnalyzersA spectrum analyzer, also known as a spectrum analyser in some regions, is a device used to examine the spectral composition of electrical, acoustic, or optical waveform signals. It measures signals in the frequency domain, unlike an oscilloscope, which operates in the time domain. Spectrum analysers are commonly used in wireless communications…

May 23, 2024
Steve Ponton
Communication signal tower
Communication signal tower

Why high-density microwave interconnects are used in Quantum Computing

With the increase in research of quantum computers and the development of large-scale high qubit machines, there’s a requirement for a large number of microwave cables necessary for control and readout lines to the quantum processor.Microwave connectors and cable assemblies are used in quantum computing to transmit signals that manipulate the state of qubits; qubit manipulation…

April 5, 2023
Steve Ponton
Hdconnector 5

What is an Isolator and what are they used for?

A two-port device called an RF Isolator shields RF system components from excessive signal reflection. It is a non-reciprocal device that makes certain that all power is delivered from port 1 to port 2, while absorbing and isolating any power incident at port 2. To prevent undesired signals from harming delicate components, an isolator is…

July 6, 2022
Steve Ponton
What is an RF Isolator and what are they used for?