Anritsu Signal Analyser MS2840A series (MS2840A-040/041)

The Spectrum Analyser/Signal Analyser MS2840A has an upper measurement frequency limit of 44.5 GHz and its carrier close-in SSB phase noise performance is overwhelmingly best-of-class for middle range models. The MS2840A supports measurements across a wide frequency band ranging from applications such as microwave wireless backhaul, requiring high phase-noise performance to measure transmitter carrier close-in…...

See full specification tab below or
Contact us for assistance
Key Parameters
Full Specification

At a glance: Key parameters

Manufacturer: Anritsu

MS2840A – Datasheet

Top class phase noise performance at middle-price range

  • Frequency range of 9 kHz to 3.6 GHz/6 GHz/26.5 GHz/44.5 GHz; 44.5 GHz max. built-in preamp option
  • Best close-in phase noise performance in middle range signal analyser/spectrum analyser:
    • –123 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency with all frequency models)
    • –138 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency with 3.6 GHz and 6 GHz models, meas.)
    • –140 dBc/Hz (at 150 MHz center frequency, 10 kHz offset frequency with 3.6 GHz and 6 GHz models, meas.)
  • Wide dynamic range measurement of either 50 GHz to 75 GHz, or 60 GHz to 90 GHz frequency bands using High Performance Waveguide Mixer MA2806A/MA2808A (with 26.5 GHz and 44.5 GHz models)
  • Measurements up to 325 GHz using External Mixer (Harmonic Mixer) MA2740C/MA2750C Series (with 26.5 GHz and 44.5 GHz models)
  • 31.25 MHz analysis bandwidth (standard); 125 MHz max. (option)
  • All-in-one solution with built-in signal generator option supports TRx tests (with 3.6 GHz and 6 GHz models)
  • Measurement applications (options): Phase Noise Measurement, Noise Figure Measurement, Vector and Analog Modulation Analysis, BER Measurement, Pulse Radar Measurement FunctionNEW

The Spectrum Analyser/Signal Analyser MS2840A has an upper measurement frequency limit of 44.5 GHz and its carrier close-in SSB phase noise performance is overwhelmingly best-of-class for middle range models. The MS2840A supports measurements across a wide frequency band ranging from applications such as microwave wireless backhaul, requiring high phase-noise performance to measure transmitter carrier close-in spurious, to VHF/UHF private mobile radio (PMR). Connecting the High Performance Waveguide Mixer MA2806A/MA2808A to the MS2840A not only supports wide dynamic range measurements from 50 to 90 GHz but also eliminates image-response effects at wideband signal measurements, supporting millimeter-wave wideband wireless applications, such as wireless backhaul, automobile radar, WiGig, etc., as well as evaluation of millimeter-wave radar antenna sidelobe characteristics, which requires high sensitivity. Additionally, spectrum measurements up to 325 GHz are supported by connecting the External Mixer (Harmonic Mixer) MA27xxC series.

You may also like