ELVA-1 Zero-Biased Detectors
ZBD-series Zero Biased Detectors are available in both polarities. Using a Schottky barrier beam lead diode design these detectors offer a cost-effective solution for broadband power detection systems. They provide high sensitivity to small signals and linear response up to -15 dBm. Frequency Range (GHz) 26,5-40 33-50 40-60 50-75 60-90 75-110 90-140 110-170 Input Waveguide WR-28 WR-22…...
See full specification tab below or
Contact us for assistanceSee full specification tab below or
At a glance: Key parameters
Product categories: Zero-Biased Detectors
Manufacturer: Elva-1
Frequency Range: 26.5GHz to 170GHz
ZBD-series Zero Biased Detectors are available in both polarities. Using a Schottky barrier beam lead diode design these detectors offer a cost-effective solution for broadband power detection systems. They provide high sensitivity to small signals and linear response up to -15 dBm.
| Frequency Range (GHz) | 26,5-40 | 33-50 | 40-60 | 50-75 | 60-90 | 75-110 | 90-140 | 110-170 |
| Input Waveguide | WR-28 | WR-22 | WR-19 | WR-15 | WR-12 | WR-10 | WR-08 | WR-06 |
| Waveguide Flange | UG-599/U | UG-383/U | UG-383/U-M | UG-385/U | UG-387/U | UG-387/U-M | UG-387/U-M | UG-387/U-M |
| Sensitivity at –20 dBm Input, 1 Mohm load, mV/mW (typ) | 3500/ 2000 |
3000/ 1500 |
2500/ 1300 |
2000/ 1000 |
1700/ 800 |
1500/ 700 |
1300/ 500 |
500/ 200 |
| Typical Flatness, dB | ±1.5 | ±1.5 | ±1.5 | ±1.5 | ±2.0 | ±2.0 | ±2.5 | ±2.5 |
| Typical Video Bandwidth, MHz | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
| Incident CW RF Power, dBm | 3 | 3 | 3 | 3 | 3 | 3 | 4 | 5 |
Note: Max input power level into a detector can be increased with installation of built-in attenuator. It will cause decreasing of sensitivity correspondingly.
