Anritsu Signal Analyser MS2690A

Signal Analyser with excellent fundamental performance

• Frequency range: 50 Hz to 6 GHz
• Analysis bandwidth
  • 31.25 MHz (standard)
  • 62.5 MHz/125 MHz (option)
• Supports 5G NR (sub-6 GHz) TDD/FDD
  Wide measurement dynamic range EVM performance: <0.5%
  One-button dynamic-range optimization at EVM measurement
• Offers modulation analysis, such as LTE/LTE-Advanced (FDD/TDD), WLAN IEEE 802.11ac etc. (with optional software)
• One-Box Tester with the addition of the Signal Generator option
• Batch capture measurements for the fastest analysis time
• Supports Noise Figure measurement (option)

MS269xA Series Signal Analysers are the latest high performance signal analyzers for next-generation communication applications. The MS269xA Series Signal Analyzer base units include swept spectrum analysis, FFT signal analysis, and a precision digitizer function. Add options to incorporate a Signal Generator, to turn the instrument into a hassle free, plug and play, one box solution.

The MS269xA Series Signal Analysers support a standard analysis bandwidth of 31.25 MHz that can be extended to 62.5 MHz/125 MHz/162.5 MHz with optional hardware. Using a patented calibration process, the multipoint amplitude calibration and the phase calibration result in a level accuracy of ±0.5 dB across a 6 GHz span. No other analyser on the market can meet that specification. These boxes are superlative in every way — they measure the widest signals and using the latest technology, make measurements faster than ever before. The modular architecture ensures a box that grows as measurement requirements change.

A series of options enables standards-based modulation analysis, vector signal generation, BER measurement and Noise Figure measurement. The end-user can configure a one-box solution that dramatically reduces cost, footprint, and Total Average Cycle Time (TACT) for device evaluation.

The MS269xA Series are accurate enough for the most demanding R&D environment, yet are fast enough for the factory floor! Currently supported applications include GSM, GPRS, EDGE, W-CDMA, and WLAN IEEE 802.11a/b/g/j/n/p/ac, etc. , LTE/LTE-Advanced (FDD/TDD), 5G.

The wideband FFT signal analyzer (analysis bandwidth of 31.25 MHz with option for 62.5 MHz/125 MHz/162.5 MHz) supports high-speed continuous measurements including CCDF, frequency vs. time, spectrum, and power vs. time analysis. The standard digitising function can capture waveforms and immediately play them out using the optional Signal Generator. An extended digitiser option adds the ability to capture signals up to 20 MHz wide for up to 4 hours.