Innovative surface-mount power amplifier reach full production at Arralis

K Hpa10w 1721 Sm Gif

The three-stage amplifier is fabricated with a Space-Qualified, 0.25 μm GaN on SiC process and biased at a drain voltage of 25 V.

The surface-mount version is of­fered in a 7 x 7 mm hermetically-sealed ceramic package. Alterna­tively, the chip is available as bare die or as an integrated power amplifier module with detectors for power and temperature.

The module size is 63 x 60 x 25 mm and has 2.92 mm connectors. The surface mount and bare die versions are avail­able with evaluation boards for sys­tem design and test.

These devices are part of the complete Arralis Ka-band satellite product line, including GaAs power amplifiers, low noise amplifiers, mixers, phase shifters and core chips.

The full datasheet for the K-10WHPA-1721 can be found below. If you have any questions or would like to request a quotation based on your specific requirements, please contact in**@rf***.uk

About Arralis:

Arralis offers market-leading solutions for communications and radar systems, specializing in the design and build of high frequency transceivers, RF mm-wave sub-systems and innovative antennas.

Click here to download the full datasheet –  K-HPA10W-1721-SM

Steve Ponton

Steve helps Engineers and Scientists to identify solutions for the design of RF and Microwave Systems and Optical Systems by listening to their challenges and calling upon his extensive knowledge of suppliers and specifications to deliver technical and commercial objectives.

Further reading

Here are some other, related articles that you may find useful.

Read more

Why high-density microwave interconnects are used in Quantum Computing

With the increase in research of quantum computers and the development of large-scale high qubit machines, there’s a requirement for a large number of microwave cables necessary for control and readout lines to the quantum processor. Microwave connectors and cable assemblies are used in quantum computing to transmit signals that manipulate the state of qubits; qubit…

Steve Ponton
Hdconnector 5

What is an Isolator and what are they used for?

A two-port device called an RF Isolator shields RF system components from excessive signal reflection. It is a non-reciprocal device that makes certain that all power is delivered from port 1 to port 2, while absorbing and isolating any power incident at port 2. To prevent undesired signals from harming delicate components, an isolator is…

Steve Ponton
What is an RF Isolator and what are they used for?

What are the different types of horn antenna?

An antenna that uses a metal waveguide that flares outward in the shape of a horn to focus radio waves into a beam is known as a horn antenna or a microwave horn. At UHF and microwave frequencies above 300 MHz, horns are frequently used as antennas. Their benefits include broad bandwidth, low standing wave…

Steve Ponton
What are the different types of horn antenna?